Loading ...
Loading ...
Loading ...
11
destroy the plastic parts.
6. To protect the snow thrower from corrosion when storing
for long periods, lightly oil the metal parts.
7. Store the appliance in a dry and high or locked area out of
the reach of children.
8. For the user's safety, worn or damaged parts must be
replaced. Replace with original replacement parts only.
Parts from another snow thrower may not t properly
causing an unsafe situation.
Replacing the Plastic Auger
NOTE: When replacing worn plastic plates, pay close attention
to any dierent types of bolts and nuts and where they are
positioned. This will ensure that the new plastic plates are
installed properly and securely.
1. Open the two side covers by removing the 7 screws on
each side (Figs. 15 – 16).
2. Remove the belt from the pulley on the left side
(Fig. 17).
3. Remove the screws and the nuts from the pulley (Fig. 18).
4. Remove the auger axle set (Fig. 19).
5. Remove the old auger from the housing (Fig. 20).
6. Install the replacement auger by following the above steps
in reverse order.
Fig. 15
Remove the
7 screws
Fig. 16
Side covers
Fig. 17
Belt
Fig. 18
Screws
Nuts
Fig. 19
Auger axle set
Fig. 20
Auger
Loading ...
Loading ...
Loading ...