Snow Joe SJ624E-ES User Manual

Loading ...

4. Secure the upper handle frame to the lower handle frame

with 2 sets of knob and carriage bolt like shown (Fig. 4).

Make sure the knobs are tightened.

NOTE: There are two holes on the upper handle frame

that are used for adjusting the pole length. If longer pole

is preferred, align with the lower hole; If shorter pole is

preferred, align with the upper hole.

5. Clip the cable in the cable clips on the lower handle to

secure the cable.

Discharge Chute Assembly

1. Position the chute deector over the discharge chute and

align the holes (Fig. 5). Place the washers between the

deector and the chute (Fig. 6).

2. Tighten the knobs to secure the assembly (Fig. 7).

Operation

NOTE: Before using this machine, make sure that the power

source you will use complies with the specications detailed

in this manual. Before inserting the plug into the socket, verify

that the snow thrower’s auger and plate are rmly secured

with screws, and that the plate is facing the correct direction.

Perform a test run to ensure that the rotor turns freely.

Fig. 4

Upper

handle frame

Lower

handle

frame

Lower handle

knob

Carriage bolt

Fig. 5

Discharge

chute

Chute

deector

Fig. 6

DeectorknobWasher

Bolt

Fig. 7

Loading ...

Snow Joe SJ624E-ES 21" 14-Amp Single-Stage Corded Electric Snow Blower