Loading ...
Loading ...
Loading ...
Others
128
Troubleshooting
1: The camera is not turned on.
1-1: Are the battery inserted or the AC
adaptor correctly connected?
Check the connection.
1-2: Is the battery sufficiently charged?
Use the battery that has been
sufficiently charged.
2: As the camera is turned on, it
turns off immediately.
2: Is the battery charge insufficient to
operate the camera?
Use the battery with charged one.
3: The brightness of the screen
changes dark or bright for a
moment.
3: This phenomenon appears when
pressing the shutter button
halfway to set the aperture value
and does not affect the recorded
pictures.
4: The picture cannot be recorded.
4-1: Is the card inserted?
4-2: Is the mode dial correctly set?
Check it.
4-3: There is no memory capacity left
on the card. Before recording,
delete some pictures.
5: The picture is not displayed on
the LCD monitor.
5: Does the picture appear on the
Viewfinder?
Press the [EVF/LCD] button to
switch to LCD monitor display.
6: The screen is too bright or dark.
6: Adjust the brightness of the
screen.
7: Flash is not activated.
7: Is the flash closed?
Press the [ OPEN] button to
open the flash.
8: Unreadable language was
selected by mistake.
8: Select [ ] icon on the [SETUP]
menu to set the desired language.
9: The subject is not focused
properly.
9-1: Is the subject out of the focus
range?
9-2: When you cannot focus on the
subject even if you tried many
times, once turn the camera off
and turn it on again.
10: The picture is not played back.
10-1: Is the card inserted?
10-2: Is there a picture in the card?
10-3: Is the mode dial set to playback
[]?
FZ10-PP.book 128 ページ ２００３年１１月１８日 火曜日 午後１時７分
Loading ...
Loading ...
Loading ...