Loading ...
Loading ...
Loading ...
8 EN
3
Connect each end of the power adapter to
(for multi handset version only):
• the DC input jack at the bottom of the
extra handset charger.
• the power socket on the wall.
Install the handset
The batteries are pre-installed in the handset.
Pull the battery tape off from the battery door
before charging.
Caution
• Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries in
fire.
• Use only the supplied batteries.
• Risk of decreased battery life! Never mix
different brands or types of batteries.
Note
• Charge the batteries for 8 hours before first use.
• If the handset becomes warm when the batteries
are charging, it is normal.
Warning
• Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may
damage the product.
Configure your phone
(country dependent)
1
When using your phone for the first time,
you see a welcome message.
2
Press [OK].
Set the country/language
Select your country/language, then press [OK] to
confirm.
The country/language setting is saved.
Note
• The country/language setting option is country
dependent. If no welcome message is displayed,
it means the country/language setting is preset
for your country. Then you can set the date and
time.
To re-set the language, see the following steps.
1
Select [Menu] > [Phone setup] >
[Language], then press [OK] to confirm.
2
Select a language, then press [OK] to
confirm.
The setting is saved.
Loading ...
Loading ...
Loading ...