Loading ...
Loading ...
Loading ...
OK
4.3.1 Main area
Main area
is the standard operating mode where
the product mows and charges automatically.
4.3.2 2nd area
To mow secondary areas the operating mode
2nd area
must be chosen. In the
2nd area
mode,
the operator must move the product manually
between the main area and the secondary area.
The product mows until the battery is empty.
When the battery is empty, the product stops and
the message
Needs manual charging
shows in
the product display. Put the product in the
charging station to charge the battery. When the
battery is charged, the product moves out of the
charging station and stops. The product is now
prepared to start operation, but needs
confirmation from the operator first.
Note: If you want to cut the main area after the
battery is charged, set the product to
Main area
mode before placing it in the charging station.
4.3.3 Park
Operating mode
Park
means that the product
remains in the charging station until a different
operating mode is selected.
4.3.4 Park / Schedule
Operating mode Park / Schedule
means that the
product remains in the charging station until the
next schedule or standby permits operation.
Refer to
To set the schedule on page 22
.
4.3.5 Override schedule
The schedule settings can be temporarily
overridden by selecting
Override schedule
. It is
possible to override the schedule for 3 h. It is not
possible to override a standby period.
4.3.6 Spot cutting
The
Spot cutting
function is activated with the
START button and is useful for quickly mowing
an area where the grass has been mown less
than in other parts of the yard. You must
manually move the product to the chosen area.
Spot cutting means that the product mows in a
spiral pattern in order to cut the grass in the area
where it was started. When this is done, the
product automatically switches back to
Main area
or
Secondary area
.
4.4 To stop the product
1. Press the STOP button on top of the
product.
The product stops and the blade motor stops.
4.5 Switch off
1. Press the STOP button.
2. Open the hatch.
3. Press the ON/OFF button for 3 seconds.
OK
4. The product shuts down.
5. Check that the indicator lamp on the
ON/OFF button is not lit.
28 - Operation 982 - 003 -
Loading ...
Loading ...
Loading ...