Loading ...
Loading ...
Loading ...
28
TQBM0479
No sound (or image).
≥ Turn muting off. ( 18)
≥ Check the connections to the other devices.
( 8, 10)
≥ Make sure that the received audio signal is
compatible with this system. ( 32)
≥ Turn this system off and then on again.
≥ If the main unit is connected to the TV with only
an HDMI cable, make sure that the TV’s HDMI
terminal is labelled “HDMI (ARC)”. If not,
connect using the optical digital audio cable.
( 8)
≥ If the main unit is connected to a Panasonic TV
and turned on using the remote control or the
touch key on the main unit, sound might not be
output from this system. In this case, turn the
main unit on using the TV’s remote control.
( 24)
≥ If the connections are correct, there might be a
problem with the cables. Redo the connections
with different cables.
≥ Check the audio output settings on the
connected device.
The dual audio cannot be changed from main
to secondary.
If the audio received from the connected device is
not “Dolby Dual Mono” or the output setting is not
“Bitstream”, the setting cannot be changed from
this system. Change the setting on the connected
device.
The volume is lowered when the main unit is
turned on.
“VOL LIMITATION” is on.
If the main unit is turned off with the volume
setting in the greater half (above 50), the main
unit will automatically lower the volume to the
middle (50) when the main unit is turned on.
( 22)
The dialogue is too persistent or the dialogue
does not sound natural.
This system has a function to make the dialogue
stand out when the volume is low. ( 21)
The sound lags behind the image.
Depending on the TV, when this unit is connected
to it via Bluetooth
®
, the sound output from this unit
may lag behind the TV image. Connect this unit
and the TV with an HDMI cable/optical digital
audio cable. ( 8)
Sound stops.
The power of the main unit turns off
automatically.
(When the main unit detects a problem, a safety
measure is activated and the main unit
automatically switches to standby mode.)
≥ There is a problem with the amplifier.
≥ Is the volume extremely high?
If so, lower the volume.
≥ Is this system placed in an extremely hot place?
If so, move this system to a cooler place and
wait a few moments and then try to turn it on
again.
If the problem persists, confirm the display, turn
this system off, remove the AC mains lead cord
and consult your dealer. Please be sure to
remember the display that was indicated and
inform the dealer.
Sound
SC-HTB900-EGEBGN-TQBM0479_eng.book 28 ページ ２０１９年４月１６日 火曜日 午後７時５８分
Loading ...
Loading ...
Loading ...