Loading ...
Loading ...
Loading ...
Basic Operation & Riding
86
Riding in Reverse
NOTICE
Your ATV may be equipped with a reverse speed limiter, which helps
the vehicle to maintain a safe speed while riding in reverse gear.
6.
Release the rear brake lever/parking brake lever.
7.
Open the throttle gradually and ride slowly. Do not open the
throttle suddenly or make abrupt turns.
8.
To stop, close the throttle and gradually apply both the front and
rear brakes. Do not abruptly apply the rear brake alone.
9.
To shift out of reverse and into neutral, press the upshift switch
(5) once to shift into “N” (neutral) gear.
The transmission cannot be shifted from neutral back into reverse
when the engine speed is above 2,300 rpm or speed of your ATV is
above 2 mph (3 km/h).
The transmission cannot be shifted from reverse up to neutral when
the engine speed is above 2,300 rpm or if the speed of your ATV is
above 1 mph (1.5 km/h).
If you turn the ignition switch to the OFF (w) position while in
reverse, the transmission will automatically return to neutral (N)
when the ignition switch is turned to the ON (q) position.
WARNING
3
WARNING
Applying only the rear brake abruptly when
operating in reverse gear could cause the
front wheels to lift off the ground and the
ATV could overturn backwards.
Carefully apply both the front and rear brakes
when stopping in reverse gear.
19 TRX420FA5 FA6-31HR7640.book Page 86 Tuesday, May 29, 2018 10:11 AM
Loading ...
Loading ...
Loading ...