Loading ...
Loading ...
Loading ...
Servicing Your Honda
133
Engine Oil & Filter
4.
Reinstall the oil filter cover, making sure the bolts are tightened
to the specified torque:
9 lbf·ft (12 N·m, 1.2 kgf·m)
5.
Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 202).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
Add Engine Oil:
1.
Reinstall the oil drain bolt with the new sealing washer and
tighten it to the specified torque:
18 lbf·ft (25 N·m , 2.5 kgf·m)
2.
Fill the crankcase with the recommended grade oil
approximately:
3.8 US qt (3.6 ℓ)
3.
Reinstall the oil fill cap and dipstick.
4.
Start the engine and let it idle for 3 – 5 minutes.
5.
Stop the engine, wait 2 – 3 minutes and check the oil level. Make
sure the oil is between the upper and lower level marks on the
dipstick. If necessary, add more oil but do not overfill.
6.
Check that there are no oil leaks.
7.
Install the tank cover assembly (page 119).
8.
Install the seat (page 118).
If a torque wrench is not used for installation, see your dealer as
soon as possible to verify proper assembly.
19 TRX420FA5 FA6-31HR7640.book Page 133 Tuesday, May 29, 2018 10:11 AM
Loading ...
Loading ...
Loading ...