Loading ...
Loading ...
Loading ...
68
En
Enjoying through External Equipment
12
Using HDMI Input
The INPUT 1 and INPUT 3 terminals include HDMI terminals to
which digital video and audio signals can be input. To use the
HDMI terminal, activate the terminal and specify the types of
video and audio signals to be received from the connected
equipment. For the types of these signals, see the operation
manual that came with the connected equipment.
Before starting the menu, press INPUT 1 (or INPUT 3) on the
remote control unit or press INPUT on the Media Receiver to
select INPUT 1 (or INPUT 3). For INPUT 3, HDMI has been
selected as the factory default.
For audio, the system supports the following:
• Linear PCM (STEREO 2ch)
• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
NOTE
• PC signals are not supported.
Connecting HDMI equipment
To activate the HDMI terminal:
1 Press HOME MENU.
2 Select “Option”. ( / then ENTER)
3 Select “HDMI Input”. ( / then ENTER)
4 Select “Setting”. ( / then ENTER)
5 Select “Enable”. ( / then ENTER)
6 Press HOME MENU to exit the menu.
To specify the type of digital video signals:
1 Press HOME MENU.
2 Select “Option”. ( / then ENTER)
3 Select “HDMI Input”. ( / then ENTER)
4 Select “Video”. ( / then ENTER)
5 Select the type of digital video signals. ( / then ENTER)
• If you select “Auto”, an attempt will be made to identify
the type of digital video signals when digital video
signals are received.
6 Press HOME MENU to exit the menu.
NOTE
• If you select a parameter other than “Auto”, make such a
setting that results in natural color.
• If no image appears, specify another digital video signal type.
• For the digital video signal types to be specified, check the
operation manual that came with the connected equipment.
To specify the type of audio signals:
1 Press HOME MENU.
2 Select “Option”. ( / then ENTER)
3 Select “HDMI Input”. ( / then ENTER)
4 Select “Audio”. ( / then ENTER)
5 Select the type of audio signals. ( / then ENTER)
• If you select “Auto”, an attempt will be made to identify
the type of audio signals when audio signals are
received.
Input signal correlation table
19201080i@59.94/60Hz
720[email protected]/60Hz
1280720p@59.94/60Hz
720(1440)[email protected]/60Hz
YCB / PB CR / PR
COMPONENT
VIDEO
E
RVICE ONLY
INPUT 3
INPUT 3
R-AUDIO-L
R-AUDIO-L S-VIDEOVIDEO
INPUT 1
INPUT 1
Cable CARD
BLACK
SYST
E
HDMI
DIGITAL OUT
G-LINK
ANT/
CABLE A IN
MONITOR
OUT
INPUT 2
SUB WOOFER
OPTICAL
S400
(
TS
)
Media Receiver (rear view)
HDMI equipment
HDMI cable
(commercially
available)
Audio cable
(commercially available)
Make this connection
when inputting analog
audio signals.
Item Description
Disable
(factory default)
Deactivates the HDMI terminal.
Enable Activates the HDMI terminal.
Item Description
Auto
(factory default)
Automatically identifies input digital video signals.
Color-1 Digital Component Video signals (4:2:2) locked
Color-2 Digital Component Video signals (4:4:4) locked
Color-3 Digital RGB signals locked
Loading ...
Loading ...
Loading ...