Operating Instructions - Page 26

For PDP-5060HD. Also, The document are for others Pioneer models: PDP-4360HD

Loading ...
Loading ...
Loading ...
26
En
Basic Operations
06
Watching TV channels
Unless you set up TV channels that you can watch under the
current conditions, you cannot tune in those channels. For the
procedure, see “Setting up TV channels” on page 38.
NOTE
When watching a digital TV program, you may see
emergency alert messages scrolling at the top of the screen.
Those messages are broadcasted by TV stations as
necessary when in emergency situations.
Selecting the antenna
After confirming that the Mode switch on the remote control
unit has been set to “TV”, press ANT on the remote control unit
to select antenna A or B.
Make this selection depending on the connections to the
antenna input terminals on the Media Receiver (page 20).
Changing channels
To increase the channel number, press CH + on the remote
control unit. To decrease the channel number, press CH –.
CHANNEL UP/DOWN on the Media Receiver operates the
same as CH +/– on the remote control unit.
•Press CH RETURN to switch the currently tuned channel to
the previously tuned channel.
Press CH RETURN again to restore the currently tuned
channel.
Using 0 – 9 and • (dot) on the remote control unit
Select channels directly by pressing buttons 0 to 9. To select
subchannels, also use the • (dot) button.
EXAMPLE
To select channel 5 (1-digit channel), press 5.
To select channel 25 (2-digit channel), press 2 then 5.
To select channel 125 (3-digit channel), press 1, 2, then 5.
To select subchannel 10.01, press 1, 0, (dot), 0, then 1.
To select subchannel 10.001 (for cable TV), press 1, 0,
(dot), 0, 0, then 1.
NOTE
After entering a channel or subchannel number, you may
press CH ENTER to tune in the channel more quickly.
Each time you change a channel, a channel banner appears
that shows information about the currently selected
channel. To clear the channel banner, press INFO.
If you do not setup the TV Guide On Screen™ system, the
channel banner may not display certain types of program
information.
STANDBY/ON
ON STANDBY
VOLUME CHANNEL
TV GUIDE
ENTER
INPUT
DOWN
DOWN
LEFT
DOWN
RIGHT
UP
UP
UP
REC
TIMER
DTV 2 • 1002.102 A
12:30pm — 2:00pm
XXXXXXXXXX
12:33pm
XXX
Media Receiver
(front view)
CHANNEL UP/DOWN
Channel banner
Loading ...
Loading ...
Loading ...