User Manual - Page 14

For MCM4200. Also, The document are for others Bosch models: MCM41.., MCM42..

Loading ...
Loading ...
Loading ...
14 Robert Bosch Hausgeräte GmbH
Do not use the appliance if the power cord and/or appliance are
damaged. Always disconnect the appliance from the supply if it is left
unattended and before assembling, disassembling or cleaning.
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.
, Safety instructions for this appliance
Risk of injury
Electric shock risk
If the power is interrupted, the appliance remains switched on and
restarts when the power is restored.
Change accessories and tools only when the appliance is at a standstill
(rotary switch on 0/off) and the mains plug has been pulled out.
Never immerse the base unit in liquids or place under running water and
do not clean in the dishwasher.
Before rectifying a fault, pull out the mains plug.
Risk of injury from the rotating tools!
While the appliance is operating, never place fingers in the mixing bowl.
Always use the pusher (7a) for adding ingredients.
After switching off, the drive continues running for a short time.
Change tools only when the drive is at a standstill.
Risk of injury from sharp blades/rotating drive!
Never place fingers in the attached blender!
Blender will not operate until the lid has been screwed on tight.
Do not remove/attach the blender until the drive is at a standstill.
Risk of injury from sharp blades!
Exercise particular caution when handling the attachments!
Note shape and location of the insert when inserting it into the carrier
disc. Take hold of carrier disc or chipper disc by the designated recessed
grips only.
Do not place fingers in the feed tube. Only use the pusher when adding
more ingredients.
Grip the universal blade by the edge of the plastic handle only.
When not in use, always put the universal blade back into the acces-
sories drawer.
Do not touch blender blades with bare hands. Clean them with a brush.
Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
Add a max. 0.4 litres of hot or frothing liquid.
Risk of injury!
Never assemble blender on the base unit.
en
Loading ...
Loading ...
Loading ...