Loading ...
Loading ...
Loading ...
53
Miscellaneous
Post-mounting plate
For post-mounting models CSL24UL, CSW24UL,
CSW200UL, SL3000UL, HDSL24UL,
HDFSL24UL, and HDSW24UL commercial gate
operators. Posts not included.
Model MPEL
Remote antenna extension kit
The remote antenna extension kit allows the
antenna to be remotely installed.
Model 86LM
Plug-in loop detector
Low power. Conveniently plugs into existing
control board. Not to be used as entrapment
protection.
Model LOOPDETLM
Loop Detector
Low power loop detectors mounted and wired
separately inside control box. LiftMaster low
power accessory. Not to be used as entrapment
protection.
Model LD7LP
Vehicle sensing probe
The vehicle sensing probe is buried in the ground
and can detect a car as it approaches and will
then open the gate.
Model CP3
Solar panel kit
This kit is to replace or add a solar panel to the
operator application. 60W maximum for 24 Vdc
operators and 30W maximum for 12 Vdc
operators.
Models SP10W12V (10 Watt, 12V) and
SP20W12V (20 Watt, 12V)
Magnetic gate lock
Outdoor magnetic lock, transformer, junction
box, mounting plate and hardware. Not for use
with Solar Applications. Must be powered
separately.
Model MG1300
Heater
The heater keeps the gearbox and batteries at a
suitable temperature when the outside
temperature is below -4°F (-20°C). The
thermostat MUST be set between 45°F and 60°F
(7°C and 15.5°C) to ensure proper gate
operation. The heater can be powered by 110 to
250 Vac.
Model HTR
Solenoid lock harness kit
Model K77-37972
Warning sign
Model 40-39235
Long range RFID reader
Model LMSC1000
LiftMaster
®
Internet Gateway
Internet enabled accessory which connects your gate
operator to your WiFi network and allows you to monitor
and control gate operators and lighting accessories
enabled by myQ
®
technology.
Model 828LM
myQ
®
Business™ connected access protocol - high
capacity
Modesl CAPXL and CAPXLV
Long arm kit
To optimize performance and extend operator life, the long
arm kit model HDLGARM is recommended when installing
with gates 16 ft. or longer.
Model HDLGARM
Transformer kit
Changes input voltage (208/240/480/575 Vac) to an output
voltage of 120 Vac. Rated 208/240/480/575 Vac,
5.2/4.5/2.3/1.9 A, 60 Hz, 1 PH
Model 3PHCONV
Transformer kit is NOT compatible with 33AH batteries.
Batteries
Gate access system batteries replace or upgrade the gate operator batteries. Two
identical 12 Vdc batteries are required for each gate operator. Do not mix 7AH and 33AH
batteries within a gate operator.
7AH batteries
Standard 7 AMP-Hour Battery, 12 Vdc, to replace original
batteries provided with operator. Reuse existing
harnesses.
Models 29-NP712 (1) and K74-30762 (2)
33AH batteries
Upgrade 33 AMP-Hour Battery, 12 Vdc. Ideal for solar
applications and extended battery backup. Two required.
Model A12330SGLPK
33AH batteries are NOT compatible if transformer kit
model 3PHCONV is installed.
Battery harness, 33AH, HD Gates
For 33AH battery applications.
Model K41-0102-000
33AH battery tray, HD
For 33AH battery applications.
Model K41-0105-000
ACCESSORIES
Loading ...
Loading ...
Loading ...