Fulgor Milano F7SCO24S1 User Manual

Loading ...

Electrical connections

Be sure your appliance is properly installed and grounded

by a qualiﬁed technician. Ask your dealer to recommend a

qualiﬁed technician or an authorized repair service.

This appliance is manufactured is with a green GROUND wire

connected to the oven body. After making sure that the power

has been turned off, connect the ﬂexible conduit from the

oven to the junction box using a U.L. listed conduit connector.

Figures A and B and the instructions provided below present

the most common way of connecting the ovens.

Your local codes and ordinance, of course, take precedence

over these instructions. Complete electrical connections

according to local codes and ordinance.

WARNING

Risk of Electric Shock, frame grounded to neutral of appliance

through a connection.

Ground through the neutral conductor is prohibited for new

branch-circuit installation (1996 NEC); mobile homes; and

recreation vehicles, or in an area where local codes prohibit

grounding through the neutral conductor. For installations where

grounding through the neutral conductor. For installations

where grounding through the neutral conductor is prohibited:

• Disconnect the ground from the neutral at free end of conduit;

• Use grounding terminal or lead to ground unit; and usual

procedure.

3-Wire branch circuit (for US only)

Refer to Figure A, where local codes allow the connection of

GROUND wire from the oven to the branch circuit NEUTRAL

wire (gray or white colored wire):

- If local codes permit, connect the green GROUND wire from

the oven and the white wire from the oven to the branch

circuit NEUTRAL wire (gray or white colored wire).

- Connect the red and black leads from the oven to the

corresponding leads in the junction box.

GROUNDED NEUTRAL

White wires

Cable from

power supply

Junction box

UL listed conduit

connector

Red wires

Black wires

Cable

from oven

Bare or

green wire

4-Wire branch circuit (for US and CANADA)

Refer to Figure B:

- Connect the green GROUND wire from the oven to the

GROUND wire in the junction box (bare or green colored

wire).

- Connect the red and black leads from the oven to the

corresponding leads in the junction box.

- Connect the white wire from the oven to the NEUTRAL (gray

or white) wire in the junction box.

UNGROUNDED NEUTRAL