Loading ...
Loading ...
Loading ...
106
7. External Device Connection
Connecting External Monitors and Recording Devices
To display recorded/playback pictures on an
external monitor, select the camcorder output
signal and use an appropriate cable for the
monitor to be connected.
You can also connect recording devices, such
as a VTR, and record the output signal from
the camcorder.
You can display the same information that
is visible in the viewfinder, such as status
information and menus, on an external
monitor. Set Info. Disp. (page 14) on the
Monitoring Status screen or Output Display
(page 87) in the Monitoring menu of the full
menu to On according to the signal to output
to the monitor.
SDI OUT Connector (BNC type)
Set the output on/off setting and the output
format in the Monitoring menu (page 87).
Use a commercially available 75Ω coaxial
cable for connection.
[Note]
Check that the connection between the camcorder
and the external device is grounded before turning the
devices on.
(It is recommended that the camcorder and
external device be turned on after connecting
the 75Ω coaxial cable.)
If the external device must be connected
to the camcorder while the camcorder is
on, connect the 75Ω coaxial cable to the
external device first and then connect it to the
camcorder.
To start recording on the camcorder and
external device simultaneously
With SDI signal output enabled, set SDI/
HDMI Rec Control (page 79) >Setting in the
Project menu of the full menu to SDI/HDMI
Remote I/F or Parallel Rec to enable output
of a REC trigger signal to the external device
connected to the SDI OUT connector. This will
synchronize recording on the external device
with the camcorder.
[Notes]
If a connected external device does not support a REC
trigger signal, the device cannot be operated.
Only the REC trigger signal is output when there is no
media currently inserted.
HDMI OUT Connector (Type A
connector)
Set the output On/Off setting and the output
format in the Monitoring menu (page 87) of
the full menu.
To start recording on the camcorder and
external device simultaneously
With HDMI signal output enabled, set HDMI
TC Out >Setting (page 85) in the TC/Media
menu of the full menu to On, and set SDI/
HDMI Rec Control >Setting (page 79) in
the Project menu to SDI/HDMI Remote I/F or
Parallel Rec to enable output of a REC trigger
signal to the external device connected to the
HDMI OUT connector. This will synchronize
recording on the external device with the
camcorder.
Loading ...
Loading ...
Loading ...