2018 CHEROKEE User Guide

Loading ...

Icon Description

SYNC Button — If Equipped

Press the SYNC button on the touchscreen to toggle the SYNC feature on/off. The SYNC indicator is illuminated when

this feature is enabled. SYNC is used to synchronize the passenger temperature setting with the driver temperature set-

ting. Changing the passenger’s temperature setting while in SYNC will automatically exit this feature.

Faceplate Knob

Touchscreen Buttons

Blower Control

Blower Control is used to regulate the amount of air forced through the climate system. There are seven blower speeds

available. Adjusting the blower will cause automatic mode to switch to manual operation. The speeds can be selected

using either the blower control knob on the faceplate or the buttons on the touchscreen.

• Faceplate: The blower speed increases as you turn the blower control knob clockwise from the lowest blower setting. The

blower speed decreases as you turn the blower control knob counterclockwise.

•

Touchscreen: Use the small blower icon to reduce the blower setting and the large blower icon to increase the blower

setting. Blower can also be selected by pressing the blower bar area between the icons.

Panel Mode

Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow

of air. The air vanes of the center outlets and outboard outlets can be moved up and down or side to side to regulate

airflow direction. There is a shut off wheel located below the air vanes to shut off or adjust the amount of airflow from

these outlets.

Bi-Level Mode

Air comes from the instrument panel outlets and floor outlets. A slight amount of air is directed through the defrost and

side window demister outlets.

NOTE:

Bi-Level mode is designed under comfort conditions to provide cooler air out of the panel outlets and warmer air from

the floor outlets.

Loading ...

User Guide - Page 41