Loading ...
Loading ...
Loading ...
24
D
E
C
IMPORTANT!
Failure to follow these steps can lead to difficulties in door panel adjustment and cosmetic cap fitment.
For water dispensing door panels: Remove the protective film from the appliance doors before hanging door panels.
Ice and Water display
(Ice and Water
modelsonly)
External display module
(1)
Connect the external display module (for Ice and Water models only)
1
Remove the external display module
taped to the front of the appliance.
2
Thread the display harness through
the door panel cavity (A).
– Ensure the grommet isengaged.
3
Turn the top display tabs at an angle
into the door panel (B).
– Ensure the harness is free
ofpinching.
4
Push firmly against the bottom
display tabsand insert into the door
panel until you feel itclipsecurely.
– Ensure the display is flush
withthe door panel.
5
Remove water tube from the
holder on the appliance door (C).
6
Hang the door panel onto
M8studs.
– Ensure the panel is free to
pivot for water connections.
7
Connect the display harness onto the
appliancedoor by inserting firmly until you
feelit clip securely (D).
– On the external display, enable the
dispenser lock to prevent any water
fromdispensing during water connection.
– To lock, press the button for
4seconds. The LED above the
buttonwillilluminate.
8
Push the water tube firmly into the spigot
behind the door panel until the marked line
is not visible (E).
– Ensure the water tube is routed away
from any sharp objects or corners, and
not in a location where it can be kinked
or squashed when the door panel is
secured, (as this will stop water flow).
B
A
!9DOOR PANEL INSTALLATION - STAINLESS STEEL
Loading ...
Loading ...
Loading ...