Loading ...
Loading ...
Loading ...
9
MAINTENANCE GUIDE
General cleaning will help to prolong the life and improve performance of your treadmill. Keep the unit
clean and maintained by dusting the components on a regular basis, cleaning the two exposed sides
of the Running Belt (No. 29) will prevent dust from accumulating underneath. Keep your running shoes
clean so that dirt from the shoes does not wear the Running Board (No. 28) and Running Belt (No.
29). Clean the surface of the Running Belt (No. 29) using a clean, damp cloth. Keep liquids away from
electrical parts and the Running Belt (No. 29).
ADJUSTING THE RUNNING BELT
Place the treadmill on level ground and set it at 3.5-5 MPH to check and see if the Running Belt (No.
29) drifts from the center. Adjust the Running Belt (No. 29) according to below instructions with Allen
Wrench (No. 83)
1. If the Running Belt (No. 29) drifts to
the right, turn the adjusting bolt on the
right side ¼ turn clockwise, then turn the
left adjusting bolt ¼ turn counter-
clockwise. If the Running Belt (No. 29)
does not move, repeat this step until it
centers. Refer to image A.
2. If the Running Belt (No. 29) drifts to
the left, turn the adjusting bolt on the left
side ¼ turn clockwise, then turn the
right adjusting bolt ¼ turn counter-
clockwise. If the Running Belt (No. 29)
does not move, repeat this step until it
centers. Refer to image B.
3. Over time, the Running Belt (No. 29)
will loosen. To tighten the Running Belt
(No. 29), turn both the left & right side
adjusting bolts one full turn clockwise.
Check the tension of the Running Belt
(No. 29). Continue this process until
Running Belt (No. 29) is at the correct
tension. Make sure to adjust both sides
equally to ensure even alignment. Refer
to image C.
83
83
83
Loading ...
Loading ...
Loading ...