Loading ...
Loading ...
Loading ...
19
For the first self-clean cycle, we recommend
venting your kitchen with an open window
or using a ventilation fan or hood.
Remove the shelves, broiler pan, broiler
grid, all cookware and any aluminum foil
from the oven.
The oven shelves can be self-cleaned,
but they will darken, lose their luster
and become hard to slide.
Soil on the front frame of the range and
outside the gasket on the door will need
to be cleaned by hand. Clean these areas
with hot water, soap-filled scouring pads
or cleansers such as Soft Scrub
®
.
Rinse well with clean water and dry.
Do not clean the gasket. The fiberglass
material of the oven door gasket cannot
withstand abrasion. It is essential for the
gasket to remain intact. If you notice it
becoming worn or frayed, replace it.
Wipe up any heavy spillovers on the oven
bottom.
Make sure the oven light bulb cover is in
place and the oven light is off.
IMPORTANT: The health of some birds is
extremely sensitive to the fumes given off
during the self-cleaning cycle of any range.
Move birds to another well ventilated room.
If your model has a door latch, never force the latch handle. Forcing the handle will damage the door lock mechanism.
The oven door must be closed and all controls set correctly for the cycle to work properly.
Using the self-cleaning oven.
Before a Clean Cycle
Wipe up heavy soil on the oven
bottom.
How to Set the Oven for Cleaning
Touch the SELF CLEAN pad.
Using the + or pads, enter the
desired clean time, if a time other than
4 hours and 20 minutes is needed.
Clean cycle time is normally 4 hours
and 20 minutes. You can change the clean
time to any time between 3 hours and 5
hours, depending on how dirty your oven is.
Touch the START pad.
The door locks automatically. The display
will show the clean time remaining. It will
not be possible to open the oven door
until the temperature drops below the
lock temperature and the LOCKED door
light goes off.
When the LOCKED door light is off, open
the door.
The oven shuts off automatically when the
clean cycle is complete.
The words LOCKED or LOCK DOOR will
flash and the oven control will signal if
you set the clean cycle and forget to close
the oven door.
To stop a clean cycle, touch the
CLEAR/OFF pad. When the LOCKED
door light goes off indicating the
oven has cooled below the locking
temperature, open the door.
Troubleshooting TipsOperating InstructionsSafety Instructions Care and Cleaning Installation Instructions
Loading ...
Loading ...
Loading ...