Loading ...
Loading ...
Loading ...
17
Changing the Speed of the Increase or Decrease Pads
As you use the INCREASE or DECREASE pads when
setting a time or temperature, you may notice the
display changes slowly. This special feature allows
you to change the speed.
To set the speed you prefer, follow the steps
below.
Touch the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until
the display shows SF.
Touch the + pad. The display will show
you a set speed between 1 and 5.
Touch the + pad to increase the speed
up to the number 5.
Touch the – pad to decrease the speed
down to the number 1.
Touch START to activate the setting
and leave the control set in this special
features mode.
+
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is touched. This continual
6 second beep may be canceled.
To cancel the 6 second beep:
Touch the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until
the display shows SF.
Touch the BROIL HI/LO pad. The
display shows CON BEEP (continual
beep). Touch the BROIL HI/LO pad
again. The display shows BEEP.
(This cancels the one beep every
6 seconds.)
Touch the START pad.
+
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock.
If you would prefer to have a 24 hour
military time clock or black-out the clock
display, follow the steps below.
Touch the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until
the display shows SF.
Touch the TIMER/CLOCK pad once.
The display will show 12 hr. If this is
the choice you want, touch the
START pad.
Touch the TIMER/CLOCK pad again to
change to the 24 hour military time clock.
The display will show 24 hr. If this is the
choice you want, touch the START pad.
Touch the TIMER/CLOCK pad again to black-
out the clock display. The display will show
OFF. If this is the choice you want, touch the
START pad.
NOTE: If the clock is in the black-out mode, you will
not be able to use the Delay Start function.
+
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after the
cooking function is finished.
To activate this feature, follow the steps
below.
Touch the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until
the display shows SF.
Touch the COOKING TIME pad.
The display will show Hld OFF.
Touch the COOKING TIME pad again
to activate the feature. The display will
show Hld ON.
Touch the START pad to activate
the cook and hold feature and
leave the control set in this special
features mode.
+
Troubleshooting TipsOperating InstructionsSafety Instructions Care and Cleaning Installation Instructions
Loading ...
Loading ...
Loading ...