Loading ...
Loading ...
Loading ...
en Crease-removal function
52
Note: If you pour more than 180 ml
drinking water into the appliance and
Refresher-container is empty,
please re-fill. does not go out on the
display, this means that the drinking
water has been poured into the
wrong filling hole or the appliance is
not fully level. Pour the drinking
water into the filling hole on the front
or make the appliance level.
~ "Installing the appliance"
on page 13
7. Push the condensation container
back into the appliance until you feel
it lock into place.
8. Press A Start/Reload.
Programs for removing
creases
■ Do not run crease-removal programs
without a load in the drum. Comply
with the washing instructions on the
clothing label and do not exceed the
maximum permitted load for the
crease-removal
programs.~ Page 27
■ Opening the door during a crease-
removal program pauses the
program. To resume the program,
close the door and press A Start/
Reload.
■ Crease-removal programs run for
approx. 45 minutes on average.
They may run for longer at low
ambient temperatures; at high
ambient temperatures, the run time
may be reduced.
■ There may be some extra noise
when a crease-removal program is
running.
■ Crease removal results may vary
depending on the type of fabric, the
amount of laundry and the selected
program. For best results, take the
laundry out of the machine as soon
as the program comes to an end,
hang it on a clothes hanger to finish
drying and reshape it while still
damp.
Loading ...
Loading ...
Loading ...