Loading ...
Loading ...
Loading ...
Home Connect en
45
Flex start
Activate the Flex start function to allow
your smart energy system (Energy
manager) to start your appliance once
your home photovoltaic system is able
to provide sufficient energy or the
energy tariff is good.
Note: Your smart energy system
(Energy manager) cannot start your
appliance until it is connected to the
appliance.
1. Select the programme you require.
2. Press Finished in .
3. Select the time period you require.
Note: The time period can be set in
1-hour increments up to 24 h.
4. Press A Start/Reload.
Delayed start appears in the display.
5. Press Remote Start }.
Flex start appears in the display.
The FlexStart function has now been
activated and the appliance will wait to
be remotely started by the smart energy
system (Energy manager).
: Ready in approx. appears in the
display. The smart energy system
(energy manager) has set a time at
which your appliance can start. The
program will end after the specified
time.
Notes
■ If the smart energy system (Energy
manager) does not start your
appliance, the programme will still
be started before the set time period
ends.
The programme will end when the
time period ends.
■ For safety reasons, Remote Start
and in turn the Flex start function will
be deactivated in the following
circumstances:
– Press A.
– Open the door.
– Programme end.
– Press # to switch off the
appliance.
– Power failure.
If the Flex start function is
deactivated, the Finished in will
remain active.
Adding more laundry or removing
laundry:
Note: If the Flex start function has
already been activated but the
programme has not yet started, you will
still be able to load more laundry or
remove some from the drum.
1. Press A Start/Reload.
2. Open the door.
3. Add or remove laundry.
4. Close the appliance door.
5. Press A Start/Reload.
6. Press Remote Start }.
The FlexStart function has now been
activated and the appliance will wait to
be remotely started by the smart energy
system (Energy manager).
Loading ...
Loading ...
Loading ...