Loading ...
Loading ...
Loading ...
Crease-removal function en
51
…Crease-removal
function
Crease-removal functi on
This appliance has programs for
removing creases from dry clothing that
has not been worn for long and for
reducing odours.
Notes
■ See the laundry tips. ~ Page 32
■ Wash clothing with traces of
perfume, deodorant or sweat before
wearing again.
■ Do not run a crease-removal
program with the following items:
– Items made from wool, leather,
viscose, or featuring metal,
wooden or plastic parts.
– Waxed and oiled jackets.
■ Do not use dryer cleaning sets.
Filling the water tank
Your appliance uses cold drinking water
to remove creases from dry clothing
that has not been worn for long. Use the
water jug provided to pour the water
into the filling hole in the front of the
appliance.
Caution!
Risk of material damage and damage
to the appliance
Fluff may remain in the appliance or the
appliance may be damaged by deposits
or debris if drinking water is not used
for crease removal.
■ Always use cold drinking water for
crease removal.
■ Do not use condensed water,
distilled water, additives or descaler.
1. Select the required crease-removal
program.~ "Overview of
programmes" on page 27
2. Configure the settings for the
required crease-removal program.
3. Press A Start/Reload.
4. Refresher-container is empty,
please re-fill. will appear on the
display.
Note: If Refresher-container is
empty, please re-fill. does not
appear on the display, the water tank
is already filled with the correct
amount of water and the program
will start.
5. Pull out the condensation container
horizontally.
6. Use the water jug provided to pour
approx. 180 ml cold drinking water
into the filling hole in the front of the
appliance, until Refresher-container
is empty, please re-fill. goes out on
the display and an audible signal
sounds.
Loading ...
Loading ...
Loading ...