Loading ...
Loading ...
Loading ...
3.
Make sure that the lug on the brake
caliper bracket is positioned in the slot on
the swingarm.
4.
Adjust the drive chain slack. 2 P. 95
5.
Install and tighten the rear axle nut.
Torque: 65 lbf·ft (88 N·m, 9.0 kgf·m)
6.
Tighten the drive chain adjusting nuts
lightly, then hold the adjusting nuts and
tighten the lock nuts.
7.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
20180222155238_31K0AA000_enu_BOOK Page 120 Thursday, February 22 2018 16:01:26 JST
Tire Puncture u Removing Wheels
Troubleshooting
117
Brake caliper bracket
Lug Slot
Swingarm
Loading ...
Loading ...
Loading ...