Loading ...
Loading ...
Loading ...
5.
Remove the rear axle shaft, side collars,
axle washer and rear wheel.
u Support the brake caliper assembly so
that it doesn’t hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on the
disc or pad surfaces.
u Do not push the brake pedal while the
brake caliper is removed.
Installation
1.
Attach the right and left side collars in
their original locations on the wheel.
2.
To install the rear wheel, reverse the
removal procedure.
u Take care to prevent the brake caliper
from scratching the wheel during
installation.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
20180222155238_31K0AA000_enu_BOOK Page 119 Thursday, February 22 2018 16:01:26 JST
Tire Puncture u Removing Wheels
Troubleshooting
116
Loading ...
Loading ...
Loading ...