Loading ...
Loading ...
Loading ...
Functional requirements
Ensure full functionality:
– Do not cover sensors, for instance with
stickers, bicycle racks or similar.
– Keep the sensors clean and free of ice.
Switching on/off
Switching on automatically
The system switches on automatically in the
following situations:
– If selector lever position R is engaged
when the engine is running.
The rearview camera also switches on.
– With front PDC: when obstacles are de-
tected behind or in front of the vehicle
by PDC and the speed is slower than ap-
prox. 2.5 mph/4 km/h.
With front PDC: automatic activation on ob-
stacle detection can be switched off. Via the
Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Parking"
4. "Automatic PDC Activation": depending
on the vehicle equipment.
5. "Automatic PDC Activation"
The setting is stored for the driver pro-
file currently used.
Automatic deactivation during
forward travel
The system switches off when a certain
driving distance or speed is exceeded.
Switch the system back on, if needed.
With front PDC: switching on/off
manually
Press the park assistance button.
– On: the LED lights up.
– Off: the LED goes out.
The rearview camera image is displayed if
the reverse gear is engaged when pressing
the park assistance button.
Depending on the equipment version, the
system cannot be switched off manually if
the reverse gear is engaged.
Warning
Signal tones
An intermittent tone indicates when the ve-
hicle is approaching an object. E.g., when an
object is detected to the left rear of the ve-
hicle, a signal tone sounds from the left rear
speaker.
The shorter the distance to the object, the
shorter the intervals.
When the distance to a detected object is
less than approx. 10 inches/25 cm, a contin-
uous tone is sounded.
With front PDC: when objects are simulta-
neously located both in front of and behind
the vehicle, an alternating continuous sig-
nal is sounded.
The signal tone is switched off, when selec-
tor lever position P is engaged on vehicles
with Steptronic transmission.
Volume
The ratio of the PDC signal tone volume to
the entertainment volume can be adjusted.
1. "My MINI"
2. "System settings"
3. "Tone"
4. "Volume settings"
5. "PDC"
6. Set the desired value.
The setting is stored for the driver profile
currently used.
Seite 190
CONTROLS Driving comfort
190
Online Edition for Part no. 01405A2C1C9 - II/21
Loading ...
Loading ...
Loading ...