Loading ...
Loading ...
Loading ...
22
The MCD600 has two MP3/WMA Modes of Opera-
tion: All Mode and Folder Mode. Refer to figures
38 and 39. Select the desired mode by pressing the
MODE Push-button on the Remote Control.
The All Mode will playback all the tracks on the disc
starting with tracks not in folders, followed by the
tracks contained in the folder. The Folder Mode will
play back the tracks contained in the selected folder.
Refer to figure 40.
1. Press the PLAY/PAUSE/; Push-button to start
Playback. Refer to figure 41.
After all the tracks have been played the MCD600
will stop.
Note: Use the ▲ up and ▼ down directional Push-
buttons to select folders on the disc.
Note: To view and/or delete the selections pro-
grammed, use the
TRACK NEXT :
Push-button to step through programmed
tracks and the CLEAR Push-button to re-
move any unwanted selections.
4. To start playback of the just entered program,
press the PLAY/PAUSE/; Push-button. Refer
to figure 36.
After playback begins, the Repeat Mode can be
activated to provide continuous playback of the
Programmed Track(s). Refer to figure 10.
Note: To momentarily stop playback, press the
PLAY/PAUSE/;Push-button. To re-
sume Program Playback press the PLAY/
PAUSE/; Push-button.
5. To cancel the Program Playback Mode, press the
STOP< Push-button, then the SHIFT Push-button
and then the RANDOM Push-button.
Once the Program Playback Mode is active, tracks
may be added or deleted by first pressing the STOP<
Push-button followed by entering the additional tracks
using the Numeric Push-buttons or delete the last
track programmed by using the CLEAR Push-button.
MP3/WMA Disc Playback
The MCD600 has the ability of playing back MP3
and WMA encoded discs. MP3 and some version of
WMA coding allow more tracks on the Disc by us-
ing the technique of lossy compression applied to the
original audio information. These Tracks have lower
audio quality than the original recording. Load a MP3/
WMA disc into the MCD600. Refer to figure 37.
2. Enter the first desired selection (track 6) using the
Numeric Push-buttons. The Front Panel Display
will first indicate track 6 followed by indicat-
ing the total number of tracks and total playback
time for the current program. Refer to figures 30
and 31.
3. In a similar manner, enter the remaining Tracks 4
and 2. Refer to figures 32 thru 35.
4 m s
Figure 32
2 8m28s
Figure 33
2 m s
Figure 34
3 15m53s
Figure 35
6 0m03s
Figure 36
6 m s
Figure 30
1 4m59s
Figu re 31
Figure 37
DISC 10
All Mode
Figure 38
Folder Mode
Figure 39
How to Operate the MCD600, con’t
1 mp-3
Figure 40
Figure 41
4 2m15s
Loading ...
Loading ...
Loading ...