Loading ...
Loading ...
Loading ...
10
Connections to Analog Preamplifier or
Integrated Amplifier
Connections to Analog Preamplifier or Integrated Amplifier
The MCD600 provides complete Digital Audio
to Analog Audio conversion from CD Discs, SACD
Discs, Data Discs and USB Flash Memory Drives. It
also provides Digital Audio to Analog Audio conver-
sion from external components with Digital Audio
Output Signals connected to the MCD600 Digital
Inputs.
Power Control provides the ability for the MCD600
to be remotely switched On/Off from a Preamplifier
or Integrated Amplifier via the Power Control Con-
nection.
The MCD600 Data Port Connection allows for the
remote operation of basic functions using the Pream-
plifier or Integrated Amplifier Remote Control. With
an external sensor connected to the MCD600, remote
control operation is possible from another room and/
or when the MCD600 is located in a cabinet with the
doors closed.
The connection instructions below, together with
the MCD600 Connection Diagram located on the
separate folded sheet “Mc1A” is an example of a typi-
cal audio system. Your system may vary from this,
however the actual components would be connected in
a similar manner. For additional information refer to
“Connector and Cable Information” on page 4.
Power Control Connections:
1. Connect a Control Cable from the Preamplifier
or Integrated Amplifier Power Control Main Out
Jack to the POWER CONTROL IN Jack on the
McIntosh MCD600 SACD/CD Player.
2. Optionally, connect a Control Cable from the
MCD600 SACD/CD POWER CONTROL OUT
Jack to additional McIntosh components with a
Power Control In Jack.
Data Control Connections:
3. When a Data Port connection on the Preampli-
fier or Integrated Amplifier is available, connect a
Control Cable from the Preamplifier or Integrated
Amplifier (Setup Assigned) Data Port Jack to the
McIntosh MCD600 SACD/CD Player DATA IN
Jack.
Sensor Connections:
4. Optionally, connect an IR Sensor to the McIntosh
MCD600 SACD/CD Player IR IN Jack.
Digital Audio Input Connections:
5. Connect an Optical Cable from the MCD600
SACD/CD Player DIGITAL AUDIO INPUT OP-
TICAL Connector to the Optical Digital Output
Connector on the Music Streamer.
Note: A Coaxial Cable Connection may be used
instead of the Optical Connection.
6. Connect a Digital Coaxial Cable from the
MCD600 SACD/CD Player DIGITAL AUDIO IN-
PUT COAX Connector to the Digital Coax Output
Jack on the Tuner.
Note: An Optical Cable Connection may be used
instead of the Coaxial Connection.
Digital Audio Output Connections:
7. Connect an Optical Cable from the MCD600
SACD/CD Player DIGITAL AUDIO OUTPUT
OPTICAL Connector to the Optical 1 Digital
Input Connector on the Preamplifier or Integrated
Amplifier.
Note: A Coaxial Cable Connection may be used
instead of the Optical Connection.
8. Connect a Digital Coaxial Cable from the
MCD600 SACD/CD Player DIGITAL AUDIO
OUTPUT COAX Connector to the Digital 2 Coax-
Input Connector on the Preamplifier or Integrated
Amplifier.
Note: An Optical Cable Connection may be used
instead of the Coaxial Connection.
9. If the MCD600 is to be connected directly to a
Power Amplifier proceed to the next page.
AC Power Cords Connections:
10. Connect the McIntosh MCD600 SACD/CD Trans-
port AC Power Cord to a live AC outlet.
Loading ...
Loading ...
Loading ...