EO241150M User Manual

Loading ...

ERROR MESSAGES

If ERR message is shown on display, with relevant acoustic sig-

nal, the oven had a malfunction. Press START/STOP button (H)

for 2 seconds to reset the control and disconnect the plug from

wall outlet. Check troubleshooting section.

SETTING THE CLOCK

The rst time the appliance is connected to the main electricity

supply or after it has been without power for some time, it will

beep and four dashes (“-- : --”) appear on the display.

After 5 seconds the display will turn o, since the clock has not

been set, and the electronic control will go into stand-by mode.

To set the time, proceed as follows:

Press the START/STOP button (H) for at least 5 seconds.

The hour ashes.

Set the required hour with TOAST COLOR/TIME dial (G).

Press the START/STOP button (H). The minutes ash.

Set the required minutes with TOAST COLOR/TIME dial (G).

Press the START/STOP button (H). The set time is displayed.

If you want to adjust the time later, repeat the setting procedure

described above. The electronic control must be in stand-by

state to adjust the clock.

OVEN FUNCTION

In the stand-by mode, the Display shows the

clock (if set)

or --:--.

• Pressanybutton(HLN)orturnanydial(GMO).Theoventurns

on. This is the Function selecting mode. The Default selected

function is BAKE. The modiable values ash.

If there are no buttons pressed or dials turned within 2 minutes of

the selection mode function, the control defaults back into stand-

by mode.

• TurntheFUNCTION selection dial (O) to select the function want-

ed.

• TurntheTEMPERATURE/PIZZASIZE/SLICES/TRAYdial(M)toset

the temperature if needed (not required in some programs). In

some function the temperature is automatically set (the display

doesn’t show the preset temperature).

In the PIZZA function set the size.

In the COOKIES function set the number of trays.

• Turnthe TOAST COLOR/TIME dial (G) to set the timer if needed.

- Both PIZZA and COOKIES functions have a preset timer.

- In PIZZA function the time will change depending on the selected

size.

- In COOKIES function it is possible to modify the cooking time.

• PresstheSTART/STOPbutton(H)tostartcooking.TheredONlight

(I), that is located around the edge of the START/STOP button (H)

, turns on. When the timer elapsed, the display shows “End” and

play a sound signal.

Press START/STOP button (H) to reset the oven and stop the func-

tion. It is possible to interrupt the cooking process at any time

by pressing START/STOP button (H). The oven goes into stand-by

mode. In the BAKE, CONVECTION and COOKIES functions, the

oven plays a sound signal when the rst target temperature is

reached. In BAKE and CONVECTION function is possible to check

the cavity temperature by pressing the Cavity temperature

check button (L). The temperature is displayed for 5 seconds.

• Itispossibletochoosethetemperaturevisualizationin°Forin°C.

Default setting is in °F. To change setting select BAKE or CONVEC-

TION function, press Cavity temperature check button (L) for 5

seconds. The visualization will change to °C with acoustic signal.

To come back to °F visualization repeat the same oparation.

Loading ...

User Manual - Page 8