Loading ...
Loading ...
Loading ...
17
HOW TO CHARGE THE BATTERY
The Robot Cleaner returns to the home station
at the end of a cleaning cycle or when its battery is running low.
※
If 10 minutes elapse without the Robot Cleaner moving or
the battery is too low, the power will be automatically turned OFF.
※
Do NOT turn OFF the Main Power Switch as the battery will not be
recharged. If the machine is returned manually with the Main Power Switch
OFF, it announces an error message, "Main power switch on the back of the
Robot cleaner is turned off. Please turn the switch on."
※
In the event that the unit returns to the Home Station due to a low battery
during the cleaning, cleaning will be started, after recharging, from the nearest
place of the area which has not been cleaned before.
※
If Robot Cleaner is unable to dock to the home station on its rst attempt, it will try again until it docks successfully.
※
When Robot Cleaner has completed all areas that it can clean,
it will return to the home station even when the battery level is not low.
You can manually charge the battery prior to using the Robot Cleaner for the rst time or to charge the battery during cleaning.
Method 1. Attach the Robot Cleaner to the home station by
aligning to the front side of the home station. A melody
sound will be generated along with an audio message to
start charging.
※
If a voice message, "Main power switch on the back of
the Robot cleaner is turned off. Please turn the switch
on." is announced repeatedly, then turn on the Main
Power Switch.
Method 2. When the 'HOME' button of the remote control or the
Robot Cleaner is pressed, charging will be prompted
by automatically generating a searching signal and
returning the Robot Cleaner to the home station.
※ If the Robot Cleaner did not start cleaning from the home station or if the Robot Cleaner is manually charged by pressing the
Home button, it may take slightly longer to nd the home station.
※
If the Robot Cleaner is within 10 cm of the front of the charging terminal while the power is turned on from Standby,
it will automatically be returned to the home station and charging will begin.
Automatic charging
Manual charging
Take the following precautions when using the home station:
• If foreign material is caught on the charging terminal, charging may not be activated. Wipe the terminal from time
to time with a dry cloth after the power plug is disconnected.(p28)
• To prevent electric shock or damage to the home station,
do not touch the charging terminal with any metallic objects.
• To avoid fire or electric shock, never disassemble or modify the home station.
• Do not to place the Robot cleaner, the home station or power plug near a heating source.
Tip
Loading ...
Loading ...
Loading ...