Loading ...
Loading ...
Loading ...
7
ASSEMBLE THE RACK
1. Lay the stand legs on the floor and place the
stand base in position on top of them. This
makes it much easier to get the bolts in. NOTE:
Ensure the MX80 logo decal is facing outwards.
2. Attach the uprights to the stand base using (4)
M6 x 25 bolts and (4) M6 x 25 washers – DO NOT
fully tighten at this time.
3. Attach [8] bar bracket left and [9] bar bracket
right to stand legs using [4] M6 x 25 bolts and
[7] M6 x 25 washers.
4. Assemble baseplate to top of uprights using (4)
M5 x 10 bolts and (4) M5 x 10 washers.
5. Place stand assembly on floor checking to make
sure the TOP of the uprights / baseplate are level
and the stand assembly sits evenly on the floor
and does not wobble. Tighten bolts.
1. Carefully lift the weight plates from Box 1 and remove
from cradles.
2. Remove the fixed bars from Box 2 and set to the side.
3. Remove all remaining parts from Box 2.
SYSTEM ASSEMBLY
REMOVE COMPONENTS FROM PACKAGING
STEP 1 STEP 2
ITEM NO. DESCRIPTION QTY
1 STAND BASE 1
2 STAND LEG (LEFT) 1
3 STAND LEG (RIGHT) 1
4 BOLT, M6 X 25 8
5 STAND FOOT (LEFT) 1
6 STAND FOOT (RIGHT) 1
7 WASHER, M6 X 25 8
8 BAR BRACKET (LEFT) 1
9 BAR BRACKET (RIGHT) 1
10 BASEPLATE 1
11 BOLT, M5 X 10 4
12 WASHER, M5 X 10 4
11
10
2
5
8
9
3
6
1
7
4
12
Loading ...
Loading ...
Loading ...