Loading ...
Loading ...
Loading ...
11
PROBLEM SOLUTION
When the barbell
is lifted out of its
cradle an extra
weight plate lifts
out and becomes
dislodged from the
remaining weight
plate stack.
TIP: Be sure to lift the barbell vertically when removing it from the cradle. If
the barbell is pulled out at an angle, it may drag against un-selected weight
plates.
The cradle end plate is too tight. Loosen the four bolts beneath the cradle at
one end. The four holes are slotted for the purpose of adjusting the cradle
length. With the cradle end loose, place the fully loaded barbell in and out of
the cradle several times. It will self-adjust to the proper setting. To test, select
50 lbs and lift the barbell out quickly and see if the rest of the plates remain
in place without “sticking”.
Check the surfaces between weight plates to make sure they are clean and
free of debris*.
The weight plates should slide together easily with little resistance. Also check
the tabs on the weight plates to ensure they are not bent or broken from
accidental misuse. If so, replace any damaged weight plates.
The weight selector
dial feels too tight
and does not turn
smoothly.
Check to ensure you have released the weight selector dial fully by pressing
the release button. If not fully released the locking mechanism could be
hindering the dial from turning.
Adjust cradle end plate as described above.
Check to see if stand is on a firm, level surface.
Shuffle the weight plates around.
The barbell rack
seems to be loose
Tighten the bolts. If bolts have cross threaded or stripped, please contact
your dealer for replacements.
MAINTENANCE & TROUBLESHOOTING GUIDE
To ensure maximum lifespan and optimal performance follow these steps:
1. Keep your MX80 system in a dry, clean climate controlled environment at room temperature.
2. Periodically clean your weight plates and the barbell with disinfectant, applied using a lint free cloth.
3. Keep dust off the system.
4. ARMOR ALL protectant will give your system a beautiful clean and shine.
5. Periodically examine your product for damage, if repairs are required refer to the MX Select website
for information on how to service your system and purchase spare parts. Only manufacturer supplied
components can be used to maintain and repair the equipment under warranty.
6. Periodically shuffle the weight plates.
7. Store and operate your MX80 system on level ground.
8. Periodically check that the bolts on the system are tight.
For full product support, manuals and warranty requests visit: www.MXSelect.com/support
Loading ...