Loading ...
Loading ...
Loading ...
10
1. Each handset has a weight range of 20-80lbs,
in 5lbs increments (see table below). Our
patented rack and pinion design includes a
double locking safety mechanism to ensure
that weight plates cannot disengage from the
barbell. Each weight plate is secured by a dual
plate interlock feature and the selector shaft.
2. To change the weights, press the release button
on the hand grip to pop up the weight selector
dial, then turn the dial to the desired weight
increment.
3. There are two selector dials on either end of
the barbell. It is recommended that weights are
balanced at each end, however it is possible to set
each weight selector dial at different increments
to suit the style of exercise you’re performing.
This will unbalance the barbell.
4. Once you have set your weight, press the
weight selector dial so that it locks into the fully
depressed position and sits almost flush with the
barbell.
5. Carefully lift the barbell out of the cradle, being
mindful that it is lifted in a vertical movement.
The barbell can be placed on the floor or other
flat surface during use.
6. Always return the barbell to the cradle to select a
different weight, or for storage when not in use.
Prior to undertaking any lifting program, ensure you have followed the set up instructions on page 7 and are
familiar with correct operation as detailed below:
There are 13 weight increments on the MX80 system.
SETTING LBS KGS
1 20 9.1
2 25 11.4
3 30 13.6
4 35 15.9
5 40 18.2
6 45 20.4
7 50 22.7
8 55 25
9 60 27.2
10 65 29.5
11 70 31.8
12 75 34.1
13 80 36.3
OPERATING INSTRUCTIONS
WEIGHT INCREMENTS TABLE
WARNING: NEVER USE THE BARBELL
WITHOUT BOTH WEIGHT SELECTOR DIALS
LOCKED IN THE DEPRESSED POSITION.
WARNING: ALWAYS ENSURE YOUR FIXED
BARS ARE RESTING IN THE CRADLE
PRIOR TO CHANGING WEIGHTS.
Loading ...
Loading ...