Loading ...
Loading ...
Loading ...
9
Problem Possible cause Solution
The Calc-Clean light
ashes. No steam
comes out of the
soleplate and/or the
appliance beeps.
You have not done or have
not completed the Calc-
Clean process.
Perform the Calc-Clean process to
enable the steam function again (see
chapter 'Cleaning and maintenance').
The appliance has
switched o.
The auto shut-o function
is activated automatically
when the appliance has not
been used for more than 5
minutes.
To activate the appliance again, set the
on/o switch to ‘o’ position and then to
‘on’ position. The appliance then starts
to heat up again.
The appliance produces
a loud pumping sound.
The water tank is empty. Fill the water tank with water and press
the steam trigger until the pumping
sound becomes softer and steam comes
out of the soleplate.
Water droplets comes
out of the soleplate.
After the Calc-Clean process
remaining water may drip out
of the soleplate.
Wipe the soleplate dry with a piece of
cloth. If the Calc-Clean light still ashes
and the appliance still beeps, perform
the Calc-Clean process (see chapter
'Cleaning and maintenance').
Dirty water and
impurities (brown stains,
white akes, etc.) come
out of the soleplate.
Impurities or chemicals
present in the water have
deposited in the steam vents
and/or soleplate.
Performs the Calc-Clean process
regularly (see chapter 'Cleaning and
maintenance').
Water ushes out of the
soleplate.
You have accidentally started
the Calc-Clean process
(see chapter 'Cleaning and
maintenance').
Switch o the appliance. Then switch it
back on again. Let the iron heat up until
the 'iron ready' light lights up steadily.
English
Loading ...
Loading ...
Loading ...