Loading ...
Loading ...
Loading ...
7
Setting the temperature
To set the required ironing temperature, turn the temperature dial to the appropriate position. The
appliance adjusts the steam automatically, depending on the ironing temperature set.
Temperature setting Automatic setting Fabric type
SYNTH to 1
Synthetic fabrics (e.g., acetate,
acrylic, nylon, polyamide)
2
Wool, viscose, polyester and
silk
3 to LINEN
Cotton, linen
Press and hold the steam trigger to start ironing. For best ironing results, after ironing with steam,
perform the last strokes without steam.
Auto shut-o mode
Specic models in this series have the auto shut-o mode.
- To save energy, the appliance switches o automatically when it has not been used for 5 minutes.
The 'iron ready' light ashes.
- To activate the appliance again, set the on/o switch to ‘o’ position and then to ‘on’ position.The
appliance then starts to heat up again.
Cleaning and maintenance
Smart Calc-Clean System
Your appliance has been designed with a Smart Calc-Clean system to ensure that descaling and
cleaning is done regularly. This helps to maintain a strong steam performance and prevents dirt and
stains coming out of the soleplate over time. To ensure that the cleaning process is performed, the
steam generator gives regular reminders.
Sound and light Calc-Clean reminder
After 1 to 3 months of use, the Calc-Clean light starts ashing and the appliance starts beeping to
indicate that you have to perform the Calc-Clean process (Fig. 3).
Tip: You can continue to dry iron by not pressing the steam trigger.
Besides that, a second defense step to protect the steam generator from scale is integrated: the
steam function gets disabled if descaling is not done. After descaling is done, the steam function will
be restored. This takes place regardless of the type of water used.
Note: The Calc-Clean process can be performed at any time, even when the sound and light reminder
is not activated yet.
English
Loading ...
Loading ...
Loading ...