Loading ...
Loading ...
Loading ...
• Cleaning & Unblocking Grind Outlet
- Feed the Cleaning Brush up into the
Grind Outlet from below, wiping &
brushing the inside surfaces.
- If the Grind Outlet is clear the bristles will
be visible inside the Grind Chamber.
• Replace Top Burr
- Ensure the dot on the Top Cover aligns
with the dot on the Grinder Collar.
- Using the two handles insert the Top Burr
into the Grinder Collar.
- The arrows on the Top Burr should align
to arrows on the Grinder Collar.
-
When correctly seated, the Top Burr will be
flush with the surface of the Grinder Collar.
- Place handles down, one on each side.
• Replace Bean Hopper
-
Ensure the Hopper Guide is aligned with
the vertical white lines on the Hopper base.
- Align & insert the Bean Hopper into the
Grinder Collar and firmly pushing down
turn clockwise to lock into place and
open the Hopper Guide.
- Reset to the Grinder Setting noted prior
to cleaning.
- Refill the Bean Hopper with coffee beans.
Adjusting Bottom Burr
The Conical Burrs are made of hardened
Stainless Steel for extra-long life. However,
after prolonged use, the Bottom Burr may
require adjustment to compensate for wear.
If the coffee grinds are too coarse when the
Grind Setting is below 2 and the espresso
is consistently under extracted, the Bottom
Burr may need adjusting.
Contact Sunbeam (details are on the back
page) should you think that the Bottom Burr
needs adjustment.
Prior to contacting Sunbeam Customer
Care, please ensure that you are using
freshly roasted beans and that the Top Burr
is seated correctly.
29
Care & Cleaning - Grinder
Note:
Sunbeam Customer Care may
determine that Bottom Burr adjustment
shims are required. Do not attempt to add
shims without first consulting Sunbeam.
Important: Old coffee beans, no matter
the Grind Setting, will have a fast
extraction and will produce an under
extracted tasting espresso.
WARNING: Do not pour water or any other
liquid into the Grind Chamber.
TOP COVER
GRINDER
COLLAR
1. ALIGN & INSERT ALIGN HOPPER GUIDE
2.TURN
HOPPER
GUIDE
Important: If the Top Burr is not seated
correctly the Grinder will produce coarse
coffee grinds. Grind off excess coffee beans
and clean the Top Burr & Grind Chamber.
Note: After cleaning, the optimum
Grind Setting may have changed. To
find the optimum Grind Setting use the
information on pages 14-15.
Loading ...
Loading ...
Loading ...