Loading ...
Loading ...
Loading ...
8
FAVORITE
This cycle allows you to program your
preferred cycle and options into one
button. To program this cycle, select the
cycle and options you desire. Then, press
and hold the FAVORITE pad until the
LED light above the pad turns ON. The
selected cycle and all options are saved
as FAVORITE and will illuminate when
the FAVORITE cycle is selected. Once
programmed, simply press the FAVORITE
pad to select the saved cycle and
options, press START and close the door
immediately to start your cycle.
FAST
For regularly soiled and pre-rinsed
dishes and silverware. Water usage is
approximately 4.5 gallons. Wash time is
approximately 30 mins.
UPPER
For lightly soiled and pre-rinsed dishes
and silverware when you do not have a
full load. Water usage is approximately
3.5 to 4.3 gallons. Wash time ranges from
approximately 52 to 128 mins.
STEMWARE
For regularly soiled China and Crystal.
Water usage is approximately 4.9 gallons.
Wash time ranges from approximately 96
to 116 mins.
Option selections
HI TEMP
When HI TEMP option is selected, the
dishwasher heats water in the main wash
to approximately 140° F (60°C).
This increase in water temperature helps
dishwasher detergent remove food, grease
and soil from dishes more effectively and
aids in drying. HI TEMP option can only
be used with AUTO, HEAVY, NORMAL
and UPPER cycles.
Controls and Settings
SANITIZE
To sanitize your dishes and glassware,
select the SANITIZE option. This option
heats the water temperature in the final
rinse to 157°F (69.4°C) and maintains that
temperature for 7 minutes. SANITIZE
is available in AUTO, HEAVY, and
NORMAL cycles. Only these sanitization
cycles have been designed to meet NSF
requirements.
The cycle time will be extended until the
proper water temperature is reached.
Washing action will continue during the
water heating delay. For best results, the
incoming water temperature should be at
least 120°F (49°C).
If the SANITIZE option is selected, the
pad illuminates with a blue light. The
sanitization criteria may not be satisfied
if there is an interruption of the cycle, a
power failure occurs, or if incoming water
temperature is below 120°F (49°C).
The SANITIZE pad will flash at the end
of the cycle if the NSF requirements for
sanitization are not reached.
AIR DRY
If the AIR DRY option is selected, the unit
will not energize the heating element. This
will reduce energy consumption, but will
reduce drying performance. Items in the
dish load may not be dry at the end of the
cycle.
MAX DRY
MAX DRY is available on AUTO, HEAVY,
NORMAL, UPPER and STEMWARE
cycles The cycle time will increase when
MAX DRY option is selected.
Loading ...
Loading ...
Loading ...