Loading ...
Loading ...
Loading ...
23
Troubleshooting
PODS
®
is a registered trademark of Procter & Gamble Company, Cincinnati OH, used under license by Electrolux.
Before calling
Before calling for service, review this list. If may save you both time and expense.
This list includes common experiences that are not the result of defective workmanship
or material in your dishwasher.
To achieve the best results from your dishwasher, visit www.dishwashingexpert.com for
general tips regarding the performance and operation of your dishwasher.
PROBLEM POSSIBLE CAUSES/SOLUTIONS
Food soils left
on dishes
• Choose another cycle for longer washing time.
• Choose the HI TEMP wash option.
• Check rack loading section for proper loading
• Avoid nesting items.
• Home water pressure may be too low-should be 20 to 120
pounds per square inch (psi).
• Check incoming water temperature. It should be about 120°F
(49°C). (See Factors Affecting Performance.)
• Check water hardness. For extremely hard water, it may be
necessary to install a water softener. (See Detergent Chart).
• Use Fresh Detergent.
• Make sure items are not blocking the spray arms, preventing
them from rotating.
Dishes not dry • Select heat dry option.
• Make sure the rinse aid dispenser is filled.
• Increase the discharge setting of rinse aid. (See Rinse Aid).
• Check the incoming water temperature. Be sure it is at least
120°F (49°C).
• Check for proper loading-avoid nesting items.
• Plastic items may need to be towel dried.
• Cups with a concave bottom will collect water. Load them at the
far left of the upper rack so they will be held in a tilted position.
Glassware/
flatware
spotted or
cloudy
• Check water hardness. For extremely hard water, it may be
necessary to install a water softener. (See Detergent Chart).
• Water temperature may be low. Avoid extremely low or high
temperatures. (See Factors Affecting Performance.
• Avoid overloading and improper loading. (See Preparing And
Loading he Dishes).
• Use fresh detergent. Old detergent is ineffective.
• Make sure rinse aid dispenser is filled.
• Check to see that proper amount of detergent is being used
for cycle selected. Also, check phosphate level. (See Detergent
Dispenser.)
• Home water pressure may be too low - it should be 20 to 120
pounds per square inch (psi).
Loading ...
Loading ...
Loading ...