Loading ...
Loading ...
Loading ...
22
Troubleshooting
Error codes
ERROR
CODE
PROBLEM SOLUTION
i10 A low fill has been detected. Look for a pinched water supply line, or
water shutoff is not completely opened.
i20; i40; iF0 Clogged filters or a restricted
drain line has been detected.
Check and clean both filters and
sump area and check for a pinched or
blocked drain hose. If the drain line is
attached to a disposer, check that the
knockout plug has been removed.
i30 A leak or overflow of water
has been detected in the
bottom pan.
Look for loose connections at the
water inlet valve and ensure the unit is
properly leveled.
i50 A problem has been
detected with the drain or
wash motor.
Pressing the cancel button or turning
power off at the breaker for 5 min.
should clear this error code and the
unit can be restarted.
If this does not resolve the
problem, service will need to be
called.
i60 A problem has been
detected with the water
heating system.
iC0 A problem has been
detected with the electronic
control system.
*In all Error code instances, if Pressing the cancel button or turning power off at the
breaker for 5 min. does not resolve the problem, contact the Electrolux Customer Care
Center at 1-877-435-3287.
User Instruction Code
USER CODE PROBLEM SOLUTION
CLOSE This indicates the door
has been left open or
not properly latched.
Ensuring the door is properly latched
will clear the display. This does
not indicate a problem with your
dishwasher and service will not need to
be contacted.
Loading ...
Loading ...
Loading ...