Loading ...
Loading ...
Loading ...
en Microwave
22
a The microwave starts and the cooking time counts
down.
a Once the cooking time has elapsed, an audible sig-
nal sounds. The time shown in the display is zero.
6.
Once the cooking time has elapsed:
‒ Press to silence the audible signal manu-
ally.
‒ If necessary, set the microwave output setting
and cooking time again.
‒ When the food is ready, press to switch the
appliance off.
7.
If you have switched off the drying function for the
microwave in the basic settings, dry the cooking
compartment.
→"Drying", Page34
Note:If you open the appliance door during operation,
the operation stops. When you close the appliance
door, you must press to continue. If you have
changed the basic setting, make sure that the mi-
crowave does not resume operation without food in-
side.
→"Basic settings", Page29
Changing the microwave output setting
If you change the microwave output setting, the cook-
ing time is reset.
1.
Press to pause operation.
The current microwave output is colour coded.
2.
Press the required microwave output setting.
3.
Press to resume operation.
Changing the cooking time
After the microwave starts operating, you can change
the cooking time directly.
▶
Use the rotary selector to change the cooking time.
a The change is applied immediately.
12.3 Microwave combination
To reduce the cooking time, you can use certain types
of heating in combination with microwave mode.
The possible microwave output settings are:
¡ 90watts
¡ 180watts
¡ 360watts
The possible types of heating are:
¡ 4Dhot air
¡ Top/bottom heating
¡ Circulated air grilling
¡ Grill, large area
¡ Grill, small area
Setting the microwave combination
Note:
Note the correct way to operate the microwave:
¡ →"Safety", Page2
¡ →"Preventing material damage", Page6
¡
¡ →"Cookware and accessories with microwave",
Page20
1.
Press .
2.
Select "Microwave combination" in the operating
modes menu.
a "Type of heating", "Temperature", "Microwave output
setting" and "Cooking time" recommendations are
displayed.
3.
Press the required function.
4.
Set the desired value with the rotary selector.
5.
Press to start the operation.
a The appliance starts to heat and the time starts to
count down.
a Once the cooking time has elapsed, an audible sig-
nal sounds. A notification appears in the status bar.
6.
Once the cooking time has elapsed:
‒ Press to silence the audible signal manu-
ally.
‒ If necessary, set another combination.
‒ When the food is ready, press to switch the
appliance off.
Changing the temperature
Once the MicroCombi operation has started, you can
change the temperature directly.
1.
Press the temperature.
2.
Use the rotary selector to change the temperature.
a The change is applied immediately.
Changing the cooking time
Once the MicroCombi operation has started, you can
change the cooking time at any time.
1.
Press "Cooking time".
2.
Use the rotary selector to change the cooking time.
a The change is applied immediately.
Changing the microwave output setting
Once the MicroCombi operation has started, you can
change the microwave output setting directly.
1.
Press the microwave output setting.
2.
Use the rotary selector to adjust the microwave out-
put setting.
a The change is applied immediately.
Changing the type of heating
If you change the type of heating, the temperature also
changes and the cooking time is reset.
1.
Press to pause operation.
2.
Press the types of heating.
3.
Use the rotary selector to change the type of heat-
ing.
4.
Press to resume operation.
Loading ...
Loading ...
Loading ...