Philips SE4451S/05 Cordless Phone Answer Machine

User Manual - Page 35

For SE4451S/05.

PDF File Manual, 39 pages, Read Online | Download pdf file

SE4451S/05 photo
Loading ...
Loading ...
Loading ...
7893 Philips SE445 07 16.03.07
7893 Philips SE445 07 16.03.07
33
Frequently asked questions
14 Frequently asked questions
www.philips.com/support
Charging
The f icon is not blinking when the
handset is placed on the base
Bad battery contact – move the handset
slightly
Dirty contact – Clean the battery contact
with a cloth moistened with alcohol
Battery is full – no need to charge
Calls
No dialling tone
No power – check the connections. Reset the
phone: unplug and plug back in the mains
Batteries are empty – charge the batteries for
at least 24 hours
You are too far from the base – move closer
to the base
Wrong line cable – use the line cable provided
Line adaptor (when needed) is not connected
to the line cord – connect the line adaptor
(when needed) to the line cord
Poor audio quality
The base is too close to electrical appliances,
reinforced concrete walls or metal doorframes
– move the base at least one metre away from
any electrical appliances
The N icon is blinking
Handset is not registered to the base
– register the handset to the base
You are too far from the base – move closer
to the base
No ring tone
The ring tone is deactivated.
Increase the volume.
Caller Line Identification (CLI) service
does not work
Check your subscription with your network
operator
Phonebook
A phonebook entry cannot be stored
The phonebook is full. Delete an entry to free
memory
Display
No display
Try recharging or replacing the batteries.
Try disconnecting and connecting the base
power supply.
If 7 segment display is not lit up, then try
disconnecting and connecting the base
power supply.
Registration
Unable to register another handset
Maximum number of 5 handsets has been
reached.
The display shows
SEA RCHI NG
. You must
unregister a handset in order to register a new
one.
Interference
Noise interference on your radio or
television
Your base or charger may be too close. Move it
as far away as possible.
Loading ...
Loading ...
Loading ...