Loading ...
Loading ...
Loading ...
7893 – Philips SE445 – 07 – 16.03.07
7893 – Philips SE445 – 07 – 16.03.07
11
Getting started
3.3 Install and charge the handset
batteries
w Warning
• The handset must be charged for at least 24
hours before using it for the first time.
• Never use any battery type other than the
one supplied. There is a risk of explosion if the
batteries are replaced by an incorrect type.
Your SE445 is supplied with two
rechargeable batteries.
1
Slide off the battery door (if fitted).
2
Insert the batteries as indicated and slide the
door back on.
3
Place the handset face up on the base
to charge.
A beep confirms the handset is placed correctly
and charging will begin.
4
When there is enough power in the
batteries, the handset will automatically
register with the base.
The standby screen is displayed. Or if the display
shows
WEL COME:
you must select the country.
If you need to select your country
•
WEL COME
is displayed and scrolls in
different languages.
• Press
m
. The country name is shown
on the display.
Scroll
u
or
d
to select your country and
press
m
.
CON FIRM?
is displayed.
• Press OK to confirm.
This will set the default settings for the
country you choose.
n Note
• If you receive a call before the country is set,
you can take the call. When the call is ended
the display returns to country setting mode.
Caller Identification will not work until the
country has been selected.
• If you make a mistake when choosing your
country, please refer to ‘Country’
on page 25.
5
Leave the handset until the batteries are fully
charged (at least 24 hours).
The handset batteries are fully charged when
the charging animation stops and the f
(battery charged) icon is displayed.
w Warning
If you insert alkaline batteries instead of
the NiMH batteries
WAR NING
BATT
will
appear on the display. Replace imediately
with batteries supplied.
3.4 Using multipacks
If you have purchased a multipack you will have
additional handsets, chargers, power adaptors
and AAA rechargeable batteries.
1
Plug the chargers into a power socket.
2
Install the batteries supplied into the
other handsets.
3
Place the handsets on the chargers to fully
charge the batteries for at least 24 hours.
Loading ...
Loading ...
Loading ...