Loading ...
Loading ...
Loading ...
7893 – Philips SE445 – 07 – 16.03.07
12
7893 – Philips SE445 – 07 – 16.03.07
Using your SE445
4 Using your SE445
4.1 Calls
4.1.1 Make a call
1
Press
r
.
2
Dial the telephone number.
4.1.2 Pre-dial
1
Enter the phone number (maximum 24
digits). If you make a mistake press
>
.
2
Press
r
to dial the phone number entered.
4.1.3 Dial one touch numbers 1 to 9
1
Press and hold a key from
1
to
9
until
the number is displayed and dialled.
If no number is stored, you hear a beep.
4.1.4 Call from the phonebook
1
Press
d
.
The first entry in the phonebook is displayed.
2
Scroll u or d to the entry you want.
3
Press
r
to dial the number.
t Tip
Instead of scrolling to browse the phonebook
entries, press the numeric key corresponding to
the first letter of the entry you wish to locate.
For example, pressing
2
will show the entries
starting with A. Pressing
2
again will show the
entries starting with B, etc...
4.1.5 Call waiting
If you have subscribed to Call Waiting service,
the earpiece will emit a beep tone to inform
you that there is a second incoming call. The
number or name of the second caller will also be
displayed if you have subscribed to Caller Line
Identification service (CLI). Please contact your
network provider for more information on this
service. To answer the second call, press
r
.
4.1.6 Call from the call log
n Note
You need to subscribe to your network’s Caller
Line Identification service to be able to see the
caller’s number in the call log. See ‘Call log’ on
page 17 for more details.
1
Press
u
to enter
CALL LOG
menu. You have
the options to access
CALL LIST
or
ANSW
MACHINE
. Press
m
to enter
CALL LIST
.
The first entry in the call list is displayed.
2
Scroll u or d to the entry you want.
3
Press
r
to dial the number.
4.1.7 Answer a call
1
When the phone rings and P flashes in the
display, press
r
or press
v
to answer
the call via the loudspeaker.
w Warning
When the phone is ringing, avoid holding the
earpiece too close to your ear as it may damage
your hearing. Handsfree activation can suddenly
increase the volume in the earpiece to a very
high level. Make sure the handset is not too
close to your ear.
n Note
If you have subscribed to your Network’s
Caller Identity service and assigned a VIP Group
to the caller’s number, the caller’s details are
displayed before the phone starts ringing (see
‘Store an entry’ on page 14 and ‘Group melody’
on page 20). You can set your phone to give the
default ringtone as soon as the call is received
then once the caller’s identity is displayed, the
assigned ringtone will start. See ‘First ring’, page 20.
t Tip
If Auto Pick up mode (see page 21) is on, simply
lift up the handset from its base to answer the
call. The default setting is off, in which case you
will need to press
r
to answer a call.
n Note
An incoming call has priority over other events.
Whenever there is an incoming call, other
operations in progress such as phone settings,
menu navigation, etc. will be ended.
4.1.8 Adjust volume
1
During a call, press u or d to adjust
the earpiece or loudspeaker volume.
The level is shown in the handset display.
Loading ...
Loading ...
Loading ...