Loading ...
Loading ...
Loading ...
Aeroscope AS-F1800
4
©
2018 DJI All Rights Reserved.
Indicators
LED1: Processor module status indicator
LED2: Network connection status indicator
LED3: UAV information capture indicator
LED4: Type 3 receiver status indicator
LED5: Type 2 receiver status indicator
LED6: Type 1 receiver status indicator
LED1: Processor module status indicator
It is used to indicate the processor’s working status.
Indicator Description
Green blinking Functioning normally or rmware updated successfully.
Yellow blinking Checking consistency when powered on or updating rmware.
Red blinking Firmware update failed.
Solid on/off Functioning abnormally.
Added two status when the rmware is updated to v03.00.00.23 or later.
Indicator Description
Yellow and red blinking alternatively Wireless dialing in progress.
Green and red blinking alternatively An abnormal SD card log was detected.
LED2: Network connection status indicator
It is used to indicate the connection status between the processor and server.
Indicator Description
Solid green Connected normally and communicating with the monitor.
Solid red Disconnected from the monitor.
Changed the solid green indicator and added ve status when the rmware is updated to
v03.00.00.23 or later.
Indicator Description
Solid green
Connected normally and communicating with the monitor via
Ethernet.
LED1
LED2
LED3
LED4
LED5
LED6
Loading ...
Loading ...
Loading ...