Loading ...
Loading ...
Loading ...
Aeroscope AS-F1800
©
2018 DJI All Rights Reserved.
3
1. Antenna Ports
[3]
Connected to the antennas with the
antenna cables.
2. Power Port
Connected to a 220V AC power outlet.
3. USB Port
Connected to a wireless network card or
a monitor.
4. Ethernet Port
Connected to a computer.
5. CAN Extension Port
Used for system debugging.
6. UART Extension Port
Used for system debugging.
7. Indicators
Six LEDs that indicate the status of each
module.
8. GND Connector
Connected to the metal bracket of the
mounting device.
In the Box
Aeroscope Processor ×1 Female Power Connector ×1
Dongle
[2]
×1 RJ45 Connector ×1
Power Cable ×1 RJ45 Waterproof Case ×1
Processor Mounting Bracket A ×2 Screw Set ×1
Screw M80 ×100 (4 pcs)
Screw Nut M80 (4 pcs)
Washer M80 (4 pcs)
Screw M60 ×18 (4 pcs)
Processor Mounting Bracket B ×2
Processor GND Cable ×1
Pin ×5
[2]
Only the waterproof dongle case is included in the North American version. The actual dongle must be
purchased separately.
Overview
1
1 1
234
5
8
6
7
ANT3ANT2
ANT0 ANT1
[3]
The antenna ports (ANT0, ANT1, ANT2, ANT3) may be used during spectrum analysis. Make sure to
select the right one.
Loading ...
Loading ...
Loading ...