Loading ...
Loading ...
Loading ...
Aeroscope AS-F1800
©
2018 DJI All Rights Reserved.
11
11. Exit DJI Assistant 2.
12. Restart the stationary unit.
13. Connect the stationary unit to the internet.
a. It is recommended to always use Ethernet when possible, because the connection is
stable and free of interference.
b. If using a wireless connection, the dongle must be installed with an active SIM card.
You may need to congure some parameters such as APN in DJI Assistant 2.
14. Log into the Aeroscope web server https://Aeroscope.djiservice.org using your assigned
account. The account management system in Aeroscope manages the relations between
each account and each Aeroscope unit. Make sure the DJI admin has added your unit to
your account. Otherwise, you will not see your unit when you log in.
Importing Certicates
In most cases, when you receive your Aeroscope stationary unit the certicate should already
be imported. If the certificate doesn’t work or has expired, you will need to import a new
certicate manually.
To import a new certicate, follow this procedure:
1. Acquire the certicate les from DJI. A single certicate consists of two les.
2. Download DJI Assistant 2.
3. Install and run DJI Assistant 2 on a windows computer (desktop or laptop).
4. Connect the computer and the Aeroscope unit to the same router or connect them directly
via the Ethernet port.
5. After the stationary unit is found in Aeroscope, click it to enter the unit page. Under
Advanced Functions, select the certicate. Import the certicate by selecting both les.
Power Cable Usage
Introduction
The Aeroscope Power Cable is used to connect the Aeroscope stationary unit to a power
supply. You can connect it directly if it is long enough for your needs. Otherwise, you can
extend it using the procedures provided below. In addition, the power cable can also be
converted into a DC power cable if necessary.
In the Box
Various according to
different national standards
Power Cable × 1 Plug Pin × 5 Female plug bracket × 1
Loading ...
Loading ...
Loading ...