Loading ...
Loading ...
Loading ...
6.2 USING THE COOKTOP BURNERS
The hob part of the product is controlled via the on the control
panel (Figure 25).
Stage "0" means off position. The remaining 6 stages indicate the
following types of use:
Figure 25
1.......
2.3....
4.5.6.
Heat Maintenance Position
Heating in Low Temperature Position
Cooking,Frying and Boiling Position
The upper part of the Solid hotplate is covered with a heat-
resistant protective material.
At first run, in order to harden the protective layer by burning it,
bring the electric burner button to position “3” and run the burner
for 5 minutes. While using the electric burners, attention should be
paid that the pots used have smooth even bottoms. You can obtain
maximum performance from your hob if you use pots with suitable
diameters and even bottoms. Using pots with small diameters on
burners with large diameters is not recommended. Because that
will cause heat loss and lead to a waste of energy.
Figure 26
YES NO NO NO
NO
Resistance of the vitroceramic glass to heat and extreme changes
of temperature is very high. A redness will be noticed on the
heated surface with time. When any heating unit is run, you may
hear a weak sound; this is normal and it has to do with the
technical structure of the system.
It does not pose any problems in terms of quality. In case sharp-
edged pots should rub against or roughly placed on the
vitroceramic glass, the sur face may become damaged. It is
recommended that you pay attention to this.
Figure 27 Figure 28 Figure 29
Symbol
EXPLANATION
Energy Class
according
to CENELEC
EN 50304
B (convection)
for
FCO 405 X
FCO 105 X
FCO 105 N
FCO 105 W
B (forced air)
only for
FCO 405 X
Table 3
11 GB
The oven light, red warning light and the fan
will be turned on. Performs the function of
defrosting the frozen foods.
The oven’s thermostat and warning light and
the lower and upper heating elements will be
switched on.
The oven’s thermostat and warning light, the
fan and the turbo heater will be switch on.
The oven’s thermostat and warning light, the
grill heater function will be switched on.
The oven’s thermostat and warning light, the
upper heating element, the grill heater, the fun
function will be switched on.
The oven’s upper heating element will be
switched on.
Light
The oven’s lower heating element will be
switched on.
6.3 USING THE OVEN
First, you need to adjust the oven function (Figure 27 and 28) and
then set the oven temperature to desired value (Figure 29).
Otherwise, the oven will not operate.
When the temperature inside your oven reaches the value you set,
the thermostat will cut the circuit and the thermostat light will go off.
When the temperature falls below the set value, the thermostat will
again be turned on and the thermostat light will be on.
* Tested in accordance with the CENELEC EN 60350-1 used for
definition of energy class.
Loading ...
Loading ...
Loading ...