Loading ...
Loading ...
Loading ...
(466,1)
北米Model "A3200BE-D" EDITED: 2018/ 12/ 11
Left-hand side
2. Use a screwdriver to remove the
secured clip of the washer tank. To make
it easy to access the bulb, turn the neck of
the washer fluid filler pipe as illustrated.
Models with halogen headlights
1) Low beam bulb
2) High beam bulb
3. Disconnect the electrical connector
from the bulb and remove the bulb from
the headlight assembly by turning it
counterclockwise.
4. Replace the bulb with new one. At this
time, use care not to touch the bulb
surface.
5. To install the bulb to the headlight
assembly, turn it clockwise until it clicks.
6. Reconnect the electrical connector.
7. Install the air intake duct with clips
(right-hand side).
8. Set the washer fluid filler pipe to the
original place and secure it by clip (left-
hand side).
& Front turn signal light
S11BE03
Right-hand side
1. Use a screwdriver to undo the clips on
the air intake duct, then remove it.
Replacing bulbs
464
Loading ...
Loading ...
Loading ...