Loading ...
Loading ...
Loading ...
(417,1)
北米Model "A3200BE-D" EDITED: 2018/ 12/ 11
3. Screw the towing hook into the thread
hole until its thread can no longer be seen.
4. Tighten the towing hook securely using
the jack handle.
After towing, remove the towing hook from
the vehicle and stow it in the tool bucket.
Fit the towing hook cover on the bumper.
WARNING
. Do not use the towing hook
except when towing your vehicle.
. Be sure to remove the towing
hook after towing. Leaving the
towing hook mounted on the
vehicle could interfere with prop-
er operation of the fuel pump
shut off function when the vehi-
cle is struck from behind.
! Front tie-down hooks
S09AF0106
The front tie-down hooks are located
between each of the front tires and the
front bumper.
! Rear tie-down holes
S09AF0107
1) Rear tie-down hole
The rear tie-down holes are located near
each of the jack-up reinforcements.
There is a plug in each rear tie-down hole.
To use the rear tie-down holes, remove the
– CONTINUED –
Towing
415
9
In case of emergency
Loading ...
Loading ...
Loading ...