Loading ...
Loading ...
Loading ...
(157,1)
北米Model "A3200BE-D" EDITED: 2018/ 12/ 11
while closing by the power rear gate
function, an electronic chirp will sounds 3
times and the rear gate will open auto-
matically.
NOTE
When the rear gate is opened using the
reverse function, it will be opened fully
or to the height registered in the
memory function.
! Rear gate auto closure function
S02AJ0104
If, while fully opened via the power rear
gate function, the rear gate is lowered by
the weight of snow and such, an electronic
chirp will sound and the rear gate auto
closure function will apply braking to the
rear gate so that it prevents a rapid closure
of the rear gate.
NOTE
. If there is snow on the rear gate, only
use the power rear gate function after
removing the snow.
. If you close the rear gate manually
just after the rear gate is fully opened
using the power rear gate function, the
rear gate drop prevention function will
detect a rapid closure of the rear gate
and apply braking to the rear gate. In
this case, this is not a malfunction.
! Selecting audible signal operation
S02AJ0109
Using an electronic chirp, the power rear
gate will give you an audible signal before
starting its operation. If desired, the audi-
ble signal can be turned off by a SUBARU
dealer. Consult your SUBARU dealer for
details.
For models with “keyless access with
push-button start system”, you can turn
the audible signal off by operating the multi
information display. For details, refer to
“Menu screens” FP197.
The ON/OFF setting of the audible signal
also works as the audible signal settings
for the “remote keyless entry system” and
the “keyless access with push-button start
system”. However, for the warning chime
such as that caused by “Reverse function”
FP154 or “Rear gate auto closure func-
tion” FP155, it cannot be set as non-
operational.
! Initialization of power rear gate
S02AJ0112
If the power rear gate detects some
abnormality while operating, an electronic
chirp will sound and the power rear gate
operation will be automatically stopped in
either opening or closing position. In this
case, the system needs to be initialized in
the following order to restart the function
properly.
! If the power rear gate is closed
S02AJ011201
1. Keep pressing the rear gate opener
switch until it unlocked and lift up the rear
gate.
2. Pull down the rear gate until it starts to
close automatically. The system will be
initialized once the gate is fully closed.
3. Operate the power rear gate and check
that the function operates properly.
! If the power rear gate is opened
S02AJ011202
1. Pull down the rear gate until it starts to
close automatically. The system will be
initialized once the gate is fully closed.
2. Operate the power rear gate and check
that the function operates properly.
– CONTINUED –
Rear gate
155
2
Keys and doors
Loading ...
Loading ...
Loading ...