Loading ...
Loading ...
Loading ...
(155,1)
北米Model "A3200BE-D" EDITED: 2018/ 12/ 11
! Memory function
S02AJ0101
Memory switch
Your desired rear gate height can be
registered.
Registration of the rear gate height:
Memory switch status
1) ON status
2) OFF status
To register the rear gate height, perform
the following procedures while the ignition
switch is in the “LOCK”/“OFF” position.
1. Open the rear gate using the power
rear gate function.
2. With the rear gate at the desired
height, stop it using the power rear gate
function.
3. Press the memory switch to select the
“ON” status.
Power rear gate button on the inside edge
of the rear gate
4. With the rear gate at the desired
height, press and hold the power rear gate
button on the inside edge of the rear gate
until an electronic chirp is heard and the
hazard warning flashers flash three times.
The electronic chirp and the flashing
hazard warning flashers confirm the se-
lected rear gate height has been regis-
tered.
NOTE
. To change the registered height,
press the memory switch to select the
“OFF” status and perform the register-
ing procedure again.
. It is possible to register the height
from a completely closed position to
– CONTINUED –
Rear gate
153
2
Keys and doors
Loading ...
Loading ...
Loading ...